Adult Traps and Trap Accessories

  • ABC Basic Light Trap (with electronics)

    ABC Basic Light Trap ABC Trap is the basic American Biophysics battery powered portable light trap. This flexible trap is setting a new standard for quality of construction and reliability in Dipteran collection equipment.With the addition of a net and battery, the ABC TRAP1 is field ready. A built-in electronics module with photosensor allows you the flexibility to program the light source and fan motor to operate in five different modes, including the military SSAM algorithm.LID2 and ROPE1 (4’ rope with handy adjustment clip) are provided along with a 6-1/2’ power cord for hanging the trap up to 7’ above the ground.External and internal hangers are provided for attractant packages such as the OCT1 slow release octenol packet.

    As the basic building block of the ABC trap series, this trap can be adapted for CO2 emission and other configurations with the addition of optional components.

    Contents
    External Attractant Hanger Internal Attractant Hanger Rope Lid Power Cord Powered by 6 volt battery
  • ABC Standard trap collection net
    ABC Standard trap collection net
    1. 1. Draw-string closure
    2. 2. Net openings only .010x.010 for smallest insect collection
    3. 3. Stainless steel ring
    4. 4. Removable 7" shelter inside the net
    5. 5. Aspiration velcro port
    6. 6. Trap adapter is availible for updraft operation
    7. 7. Dowelsare availible to convert the ABC net into a portable cage. (See Survey Kits)
    8. 8. Removable bottom tray
    9. 9. Snap together for "mini-net" application
    10. 10. Write-on label (permanent sewn-on white polymer surface) for wipe-off markers or grease pencil



    With net openings of only .010” x .010”, this net allows capture of the smallest insects. NET1, constructed of high quality polyester multifilament mesh and stainless steel ringsfor excellent sunlight and weather durability, includes many features not available elsewhere for field trapping.

    A removable shelter provides insects with an area to avoid rain and the fan’s desiccating air flow.The bottom of the net is a removable tray that allows damage-free removal of insects for taxonomy studies or identification. The aspiration of live catch samples is easily accomplished through a velcro port.A write-on label provides error-free identification of trap sites, and draw-string closures make set-ups secure and easy.

    With the addition of PROP(set of 3 wooden props sold as optional equipment) the net can be used as a transportation cage. The net dimensions are 17” (43cm) tall by 10.75” (27.3cm) diameter.

  • ABC Trap Kit 1

    ABC Trap Kit 1This kit includes the all weather, battery operated, portable, ABCTRAP1 for sampling adult mosquito or other Dipteran populations that are attracted to a diffused light source or chemical attractants.The ABC TRAP1 is engineered from the bottom up to make your job easier.

    An electronics module allows you to program the light source and fan motor to operate in 5 different modes.This trap kit includes a polyester NET1 that features a removable bottom tray for ease of catch removal, a shelter for preventing catch desiccation and a velcro opening for aspirating live samples.A fixed hanging rope (ROPE1) with an adjustable clip and a 6-1/2’ power cord allows you the convenience of hanging the trap up to 7 ft. above ground level.This kit also includes BAT6/10, a gel-cell battery which is capable of operating the trap continuously for up to 72 hrs. when fully charged.

    TRAPKIT1 is shipped with everything you need for trapping situations that do not require the use of integrally emitted CO2 as an attractant.

    Contents
    ABCTRAP1 NET1 ROPE1 BAT6/10
  • ABC Trap Kit with CO2 (Dry Ice)

    ABC Trap Kit with CO2 (Dry Ice)This kit provides the same capabilities as TRAPKIT1 with the added feature of being able to use dry ice as an integral source of CO2 for attracting mosquitoes or other Dipterans.This kit includes the American Biophysics CO2LID which is an insulated 2 liter container, assembled directly to the top of the trap, with a built-in manifold to provide CO2 at a continuous rate of approximately 500 ml per minute.

    CO2 (Dry Ice) Container:

    Capacity: 4.0 lbs. of dry ice

    Top inside diameter: 11.3 cm

    Bottom inside diameter: 10.8cm

    Inside height: 19.8

    Volume: 1.90 liters

    Flow rate: approx. 500 ml/min

    Flow Time: approx. 11.5 hrs for

    1.5lbs of dry ice.

    Contents
    ABCTRAP1 CO2LID NET1 ROPE1 BAT6/10
  • ABC Trap Kit with CO2 (Tank)

    ABC Trap Kit with CO2 (Tank)This kit has all the capabilities of TRAPKIT1 but incorporates a convenient method for using compressed CO2 from cylinders as an attractant.This kit includes the American Biophysics LID1 which is a rugged molded plastic lid, fitted with a quick connect vinyl hose assembly for attachment to a CO2 source.

    TRAPKIT3 includes FLOWSET1 which is comprised of a pressure regulator with output fixed at 15 psig, a 10 micron line filter, a 500 ml/min flow control orifice and quick-connect luer fittings.With a 5lb. CO2 tank (not provided) this trap can emit CO2 for approximately 38 hours. The CO2 flow rate can be adjusted by using different flow control orifices that are available as individual parts.TRAPKIT3 is shipped complete with everything necessary for trapping (except the CO2 cylinder).

    Contents
    ABCTRAP1 LID1 FLOWSET1 CO2LID NET1 ROPE1 BAT6/10
  • Battery Charger for 6 and 12 Volt Batteries

    Battery Charger for 6 and 12 Volt BatteriesThe charger plugs into a wall socket and has a 6 ft. cord with alligator clips for convenient connection to the battery. This charger has a rated output of 1 ampare with an expected finish charge rate of .3 amperes. These outputs will vary with the age and condition of the battery being charged. Input: 120v, 50-60Hz. Output 6 or 12 VDC, 1A

  • CDC Gravid Trap 4

    CDC Gravid Trap 4This trap is designed to collect gravid Culex mosquitoes and is powered by 4 D-cell batteries. The gravid trap's attractant contains a solution that is attractive to gravid female mosquitoes seeking an ovipositional site. This solution can be made by using a hay infusion or similar organic materials. The trap is portable and can be set wherever required.

  • CDC Gravid Trap 6v

    CDC Gravid Trap 6vThis trap, powered by a 6 volt DC power source, is designed to collect gravid Culex mosquitoes and can easily be set wherever required. The gravid trap's attractant contains a solution that is attractive to gravid female mosquitoes seeking an ovipositional site. This solution can be made by using a hay infusion or similar organic materials. The trap operates by creating an upward current of air from within the confides of the pan, so that mosquitoes are blown into the collecting bag during their pre-oviposition behavior.

  • CDC Miniature Light Trap 4

    CDC Miniature Light Trap 4CDC 4 Battery operates on 4 D-cell batteries allowing for approximately 20 hours of usage. This trap is demountable for easy transport, weighs only 1 3/4 lbs. and has a collapsible catching cage. This trap is a lightweight useful tool for live mosquito catches for virus isolation studies.

  • CDC Miniature Light Trap 6V

    CDC Miniature Light Trap 6V This light trap operates on any 6 volt d.c. source. ( The use of a 30 amp hour motorcycle battery weighing about 10 lbs. is suggested.) Several nights of operation can be expected before recharging. This lightweight trap (weighs only 1 3/4 lbs) makes it easy to use in remote areas. And a collapsible catching cage allows for ease of transporting this trap.

  • CO2 Flow Rate Orifice .004

    CO2 Flow Rate Orifice .004 .004” orifice with 1/8” barbed ends for maintaining a CO2 flow rate 100 ml/min when used in line withREG1, or a flow rate of 50 ml/min when used in line with REG2.

  • CO2 Flow Rate Orifice .005

    CO2 Flow Rate Orifice .005 .005” orifice with 1/8” barbed ends for maintaining a CO2 flow rate of 200 ml/min when used in line withREG1, or a flow rate of 100 ml/min when used in line with REG2.

  • CO2 Flow Rate Orifice .007

    CO2 Flow Rate Orifice .007 .007” orifice with 1/8” barbed ends for maintaining a CO2 flow rate of 500 ml/min when used in line withREG1, or a flow rate of 250 ml/min when used in line with REG2.

  • CO2 Flow Rate Orifice .010

    CO2 Flow Rate Orifice .010.010” orifice with 1/8” barbed ends for maintaining a CO2 flow rate of 1000ml/min when used in line withREG1, or a flow rate of 500 ml/min when used in line with REG2.

  • CO2 Flow Rate Orifice .012

    CO2 Flow Rate Orifice .012.012” orifice with 1/8” barbed ends for maintaining a CO2 flow rate of 1500ml/min when used in line withREG1, or a flow rate of 750 ml/min when used in line with REG2.

  • CO2 Tank Regulator 1

    CO2 Tank Regulator 1 The CO2 tank regulator is for connecting a CO2 cylinder to the ABC TRAP1. The regulator is preset for a fixed output of 15 psig and includes a CGA320 tank adapter and 1/8” barbed swivel fitting for tubing connetion

  • CO2 Tank Regulators 2

    CO2 Tank Regulators 2This CO2 tank regulator is identical to REG1 with the exception that the regulator is preset for a fixed output of 5 psig.

  • CO2 Trap Swivel Adaptor 1/4"

    CO2 Trap Swivel Adaptor 1/41/4” Male NPT x 1/8” Barb, 90° (Swivel).

  • D-Cell Battery Case

    D-Cell Battery Case BATTCASE holds four standard D-size batteries in an open polymer case, providing 6 volt output.

  • Female Luer Fittings

    Female Luer Fittings Female luer x 1/8” barb, with locking sleeve for quick attachment of vinyl tubing to male luer fittings. Bag of 10.

  • Gel-Cell Batteries

    Gel-Cell Batteries BAT6/10 is a totally sealed rechargeable gel-cell battery that is capable of operating the ABC TRAP1 for up to 72 hours when fully charged.This 6 volt, 10 amp-hour unit has ¼” fastons for quick connection to the trap power cord.It measures 6” long x 2” wide x 4” tall (15.2 x 5.1 x 10.2 cm) and weighs 4 lbs. (1.8kg.). With a model CHG1Automatic Battery Charger (purchased separately) a fully discharged battery can be recharged in less than 10 hours.

  • Lid Adapter for CDC Trap

    Lid Adapter for CDC Trap CDC Adapter is designed to mount on existing CDC traps in place of the standard metal “pizza pan” lid, using the nut supplied with the CDC trap.Once secure, the CO2LID or LID1 may be attached with a simple twist.Use of American Biophysics lids with CDC traps allows carbon dioxide to be presented from dry ice or tanks in a consistent manner, eliminating trap to trap variability.Another benefit of the polymer lids is the prevention of battery shorts while enroute to the trap site.

  • Net Props

    Net Props Set of three wooden dowels that are used to convert NET1 into a portable cage for transporting live specimens.Snaps on the ends of the dowels connect to snaps on the net, holding the top hoop a fixed distance from the bottom.

  • NJ Light Trap

    NJ Light Trap The New Jersey light trap is generally used to measure the effectiveness of mosquito control in populated areas and provides historical data of mosquito species and counts. This trap is usually permanently mounted and depends upon a 110-volt source of electric power that funnels the mosquitoes into a collection jar. The New Jersey light trap has been a surveillance tool for over 70 years.

  • Plastic Killing Jar with Connecting Sleeve

    Plastic Killing Jar with Connecting Sleeve KJAR is used as an alternate method of collecting Dipterans when catch viability is not a requirement. KJAR is a one pint (475ml), wide mouth, plastic jar that connects to any one of the American Biophysics ABC traps via a polyester mesh sleeve.The sleeve has draw cords at both ends for easy attachment and removal.

    The sleeve is constructed of the same high quality material as NET1 with a mesh greater than 50 per inch to retain the smallest insects.Killing chemicals may be applied to porous material and placed in the bottom of the jar or, as it is sometimes done with alcohol, applied directly to the jar.A screw cap is provided for transportation or storage of the catch.

  • Polymer Lid for use with or without CO2 tanks

    Polymer Lid for use with or without CO2 tanks This lid is a rugged, formed lid with a strap hanger, that screws onto the top of the ABC TRAP1 for supplying CO2 from a tank and regulator set, (not included) and for protecting the trap and net from rain.A female luer fitting is provided to release CO2 into the trap’s interior. ABC’s traps are designed to release CO2 in identical plumes, whether the gas is from dry ice or from tanks.

  • Polymer Lid with 2 Liter Insulated Dry Ice Container

    Polymer Lid with 2 Liter Insulated Dry Ice Container This lid is a durable formed lid, attached to an insulated 2 liter container for dry ice. The American Biophysics CO2LID can be screwed onto the ABC TRAP1 and can hold up to four pounds of dry ice.Eliminating the need for hoses, bags or other cumbersome parts, this easy to use container has a built-in manifold releasing CO2 at a uniform rate of approximately 500 ml per minute directly to the ABC TRAP1 interior.

    Use of the CO2LID eliminates trapping variability caused by wind conditions, temperature changes and humidity produced ice encasement. A 1.5 pound block of dry ice will provide constant output for the entire night.

  • Single Ring Net Bag

    Single Ring Net Bag A more basic net than NET1, this net is a truncated cone in shape, with a single 10.5” ring to maintain its shape.A write-on label provides error free identification of trap site, and a draw-string closure makes attachment to the trap secure and easy.Construction is of the same high quality materials as those used in NET1.

  • Updraft Lid Adapter

    Updraft Lid Adapter A lid adapter for converting the standard ABC TRAP1 with NET1 to operate in an updraft mode. The conversion is quick and easy.This adapter attaches to NET1 and can be used with either the CO2LID or LID1.