CO2 Equipment

  • CO2 Flow Rate Orifice .004

    CO2 Flow Rate Orifice .004.004” orifice with 1/8” barbed ends for maintaining a CO2 flow rate 100 ml/min when used in line withREG1, or a flow rate of 50 ml/min when used in line with REG2.

  • CO2 Flow Rate Orifice .005

    CO2 Flow Rate Orifice .005 .005” orifice with 1/8” barbed ends for maintaining a CO2 flow rate of 200 ml/min when used in line withREG1, or a flow rate of 100 ml/min when used in line with REG2.

  • CO2 Flow Rate Orifice .007

    CO2 Flow Rate Orifice .007 .007” orifice with 1/8” barbed ends for maintaining a CO2 flow rate of 500 ml/min when used in line withREG1, or a flow rate of 250 ml/min when used in line with REG2.

  • CO2 Flow Rate Orifice .010

    CO2 Flow Rate Orifice .010 .010” orifice with 1/8” barbed ends for maintaining a CO2 flow rate of 1000ml/min when used in line withREG1, or a flow rate of 500 ml/min when used in line with REG2.

  • CO2 Flow Rate Orifice .012

    CO2 Flow Rate Orifice .012 .012” orifice with 1/8” barbed ends for maintaining a CO2 flow rate of 1500ml/min when used in line withREG1, or a flow rate of 750 ml/min when used in line with REG2.

  • CO2 Tank Regulator 1

    CO2 Tank Regulator 1 The CO2 tank regulator is for connecting a CO2 cylinder to the ABC TRAP1. The regulator is preset for a fixed output of 15 psig and includes a CGA320 tank adapter and 1/8” barbed swivel fitting for tubing connetion.

  • CO2 Tank Regulators 2

    CO2 Tank Regulators 2 This CO2 tank regulator is identical to REG1 with the exception that the regulator is preset for a fixed output of 5 psig.

  • CO2 Trap Swivel Adaptor 1/4"

    CO2 Trap Swivel Adaptor 1/41/4” Male NPT x 1/8” Barb, 90° (Swivel).

  • Female Luer Fittings

    Female Luer FittingsFemale luer x 1/8” barb, with locking sleeve for quick attachment of vinyl tubing to male luer fittings. Bag of 10.

  • Flowset 1

    Flowset 1This kit contains everything you need to connect LID1 to a CO2 tank.The flow set includes a CO2 tank regulator (REG1) with a fixed output of 15psi, 8’ of tubing, a 500ml/min flow restrictor (ORIF7) to provide steady CO2 flow, an in-line 10 micron filter(FILT1) to protect the orifice from clogging, and quick connect fittings.FLOWSET1 will provide 500 ml/min of CO2 with the provided orifice. Alternate flow rates can be provided by purchasing optional different orifice sizes. Filled carbon dioxidecylinders of 5, 10, 15 or 20 pound capacity can be leased or purchased from your local compressed gas supplier. A 5 pound tank will provide 38.5 hours of CO2 release with this configuration.

  • Flowset 2

    Flowset 2FLOWSET2 is identical to FLOWSET1 with the exception that REG1 is replaced by REG2, with a fixed output of 5 psi.FLOWSET2 will provide 250 ml/min of CO2 with ORIF7. A 5 pound tank will provide 77 hrs. of CO2 release with this configuration.

  • Male Luer Fittings

    Male Luer FittingsMale luer fitting x 1/8” barb, with nut, locking sleeve and cap for quick attachment of vinyl tubing to LID1 or female luer fittings. Bag of 10 sets.

  • Tubing

    25’ Coil 1/4” OD x 1/8” ID Black Vinyl Tubing.